Dental Yellow Clear is hard PMMA-like resin, made of biocompatible raw materials that used in UV-cured dental fillings. It has high hardness 92 Shore D and high tensile strength, stability to mechanical stress. We recommend to use it for surgical guides and master-model printing. Low odor and absence of harmful monomers allows to print in the laboratory.

Accurate

Very precise resin, able to print dental models where exact size and fitting is a must

Odorless and Safe

Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction, can be used in lab or even at home

Biocompatible

Produced from bio-compatible raw material used in photopolymer teeth fillings

Low Shrinkage

Shrinkage less than 0.5% gives you the same size like the 3D model on your computer and it doesn't change size after postcuring.

Liquid

The resin has relatively low viscosity. It decreases time for leveling, easy to clean to provide maximum accuracy at minimum time.

Durable

Very high hardness and tensile strength

Heat Resistant
Models has long-term stability under 100°C that make possible to cast it in cold and hot silicone or 2k resin molds. Also has short-term stability up to 180°C and models can be used for films thermosettling

Compatible Printers

Characteristics

Apperance: Colored transparent liquid

Color: Transparent Yellow

Odor: Odorless

Viscosity according to Brookfield: 1-1.2 Pa*s

Tensile Strength: 60 N/mm2

Elongation at Break: 4-6%

Hardness Shore D: 90-92

Shrinkage<0.5%

For Information on creating profiles for Phrozen Shuffle: Click here

Dental Yellow Clear MSDS