FunToDo F1 + photopolymer is designed specifically for owners of SLA 3D printers. Polymer tested on Formlabs Form 1, 1+ and Form 2 printers and compatible with PreForm software. Due to the high resolution of the polymer, especially black, amazing print accuracy is achieved with a layer thickness of 0.02 mm. To obtain the desired shade of color, pigment can be added to the transparent or white F1 + polymer. Get a signature pigment kit and mix in any proportion.
Available only in version: LR (Low Reactive ) - low sensitivity. Mostly for SLA printers, with limited fine-tuning options. DLP / LED printers will require longer exposure times.
Characteristics: Packing: 1 kg Color: Transparent, White, Gray or Black Fragrance: No pronounced odor Brookfield Viscosity: 95 mPa * s at 25 ° C Shore D: 80 Density: 1.02 g / cm³ Shrinkage: <0.5% Z axis resolution (layer height): 20 to 200 microns Illumination spectrum: from 225 to 415 nm Storage conditions: 10 ° C