Fun To Do Dentifix-3D Modeling HR Resin - Transparent 1KG

Dentifix-3D Modeling Photopolymer is developed in collaboration with the dental industry leaders. The smooth matte surface resembles dental gypsum, and a carefully selected color allows you to work with models without fatigue for your eyes. The polymer is designed for printing high-precision surgical templates, demonstration models of temporary crowns and bridges, master models and any other purposes.

The Dentifix polymer has high hardness and tensile strength, and is resistant to mechanical, chemical and thermal influences during thermoforming of liners. Flavourless and without harmful monomers. To simulate gums, use the elastic polymer Dentifix Gingiva Mask.

There are 2 types of resin available:
HR (High-reactive) - increased sensitivity for DLP and LCD printers (for example Anycubic Photon, Uniz Slash +)
LR (Low-reactive) - low sensitivity for SLA printers (e.g. Formlabs Form 2)

Characteristics:
Packing: 1 kg
Color: Sandy yellow RAL 1002 (matte), Gray (matte), Transparent
Fragrance: No pronounced odor
Brookfield Viscosity: 95 mPa * s at 25 ° C
Shore D: 81
Illumination power: 18 mJ / cm²
Tensile Strength: 45 N / mm²
Elongation at break: 5%
Shrinkage: <0.2%
Z axis resolution (layer height): 10 to 150 microns
Illumination spectrum: from 225 to 415 nm
Storage conditions: 10 ° C


What's in the box?