FlashForge Creator 3 Pro Independent Dual Extruder 3D Printer
Designed and Built for Professionals
Creator 3 Pro realizes further optimization of extruder structure and printing motion control. Flashforge Creator 3 Pro adopts new-type extruders, new heating assembly, and upgraded leveling sensors, greatly improving printing effects and quality.
Features:
- Newly Upgraded Second-Generation Logic Control Chip Smoother 3-Axis Operation
- IDEX Structure - with multiple printing modes (Duplicate Printing, Dual Color Printing, and Mirror Printing) for double the efficiencies
- 60 seconds to reach extruder temperature 200°C (Fastest in This Category)
- Build Plate Reaches 100°C (212°F) in 3 to 5 minutes (Fastest in This Category)
- New dual-fan configuration for better printing quality and high success print rate
- Effortlessly swap between different nozzles and heating assembly
- New Extruder Sensor improves leveling and printing positioning accuracy
- Durable, sturdy, excellent abrasion, high temperature resistant, and corrosion-resistant. Maximum printing temperature up to 320°C. Carbon Steel (Hardened) nozzles are suitable for printing carbon fiber composite materials
All new to the Creator 3 Pro is the redesigned independent dual extruder system. Optimized for high demand engineering materials and ensure smooth extrusion of these materials. Leveling sensors are reconfigured for higher accuracy with updated components. Creator 3 Pro now greatly improves the build platform's temperature heat up speed. This provides a much quicker turnaround time for a job print. FlashForge Creator 3 Pro is your new desktop workhorse.
Reduce Lead Times
The printer that works as fast as you do!
| The heating speed of the platform is increased by 5 times. | |
| It takes only 3 minutes to heat up the build plate to 110℃. |
with multiple printing modes for double the efficiencies
Duplicate Printing Mode
Dual Color Printing Mode
Mirror Printing Mode
Flashforge Creator 3 Pro improves the success rate of leveling and makes the printing positioning more accurate.
Controllable wind speed for better printing quality of engineering filaments.
Nozzle and heating block integrated together, it's easy to detach and maintain this assembly.
Color IPS Touch-Screen
4.3-inch, simple layout, user-friendly interface design
Built-in HD Camera for Monitoring
Watch printing progress in real-time
Cloud Operation
Cloud printing, designs, storing, and operating are availble through its cloud platform.
Filament Runout Detection
Filaments run-out pause detecting sensor
Safe and Secure
Resume Printing from Power Outage
HEPA 13 Air Filter
HEPA H13 filter and activated carbon fiber can effectively filter fine dust and odor
Filament Compatibility
ABS/ PLA/ PA/ PC/ PVA/ HIPS/ PETG/ Wood/ Nylon/ ASA/ PA-CF
Build volume
300 x 250 x 200mm
(11.8 x 9.8 x 7.9 IN)
Flashforge Creator 3 Pro is equipped with an all metal hotend, 2 0.4mm Steel nozzles and 2 0.6mm Hardened Carbon Steel nozzles.
Excellent thermal conductivity and special platform adhesive tape to enhance the adhesion of printing materials
Creator 3 PRO
Apperance:
Black & Gray
Cooling:
Dual Extruder Cooling Fan
Display:
4.3 inch LCD Touchscreen with Improved Sensitivity
Build Plate:
Heating Lead Time 3-5 minutes
Extruder:
Extruder heats up to 200°C in 1 Minute
Power:
650 W
Creator 3
Apperance:
Blue, Gray & Black
Cooling:
Single Extruder Cooling Fan
Display:
4.5 inch LCD Touchscreen
Build Plate:
Heating lead time 15-20 minutes
Extruder:
Extruder heats up to 200°C in 2 minutes
Power:
500 W
Printing
Number of Extruders: Single
Print Technology: FFF (Fused Filament Fabrication)
Print Volume: 300 x 250 x 200 mm (11.8 x 9.8 x 7.9 in)
Print Precision: ±0.2 mm
Nozzle Diameter: 0.4 mm (0.6mm/ 0.8mm)
Print Speed: 10-150mm/s
Maximum Extruder Temperature: 320°C (608°F)
Heated Build Plate Temperature: Up to 120°C (248°F) Filament Compatibility: ABS/ PLA/ PA/ PC/ PVA/ HIPS/ PETG/ Wood/ Nylon/ ASA/ PA-CF/
Mechanical & Dimensions
Two Independent Extruders
Screen: 4.3-inch Touch LCD Screen
Printer Dimensions: 627 x 485 x 615mm (24.7 x 19.1 x 24.2in)
Net Weight: 40 KG (88.2 LBS)
Electrical
Power Input: 100-240 VAC, 48-63Hz
Power Output: 24 V, 20.8 A
Power: 650 W
Connectivity: USB Stick, Wi-Fi, Ethernet, and Cloud Printing
Software
Slicing Software: FlashPrint
File Input Format: 3MF / STL / OBJ / FPP / BMP / PNG / JPEG
File Output Format: GX / G
Supports (OS): Windows 7/8/10, Mac OS, and Linux
What's in the Box
Creator 3 Pro 3D Printer
2 0.4mm steel nozzles (installed)
2 0.6mm hardened carbon steel nozzles
One Spool of 1 KG Filament
Aftersales Card
Quick Start Guide
Power Cord
Scraper
USB Disk
Leveling Card
PTFE Tube
Unclogging Pin Tool
Stamping Wrench
Cross Screwdriver
Allen Wrench
Lubricating Grease
PVP Glue Stick