BlueCast X5 for Formlabs and SLA Resin Fully compatible with FORMLABS Form 1+ / 2 (Grey v3 or Castable v2 profile), DWS dw009, dw028 (DC 400 / DC 600 profile), other SLA machines and high performance dlp machines like, KUDO Titan 2, MOONRAY RayD, SOLUS, etc. Note: Bottle label may vary and indicate X5 for SLA / DLP Washing mode: Ethyl / IPA alcohol UV care: Not needed Shrinkage: Minimum Color: Light Blue Primercat: Suggested Size: 500 gr BLUE CAST X5 FOR FORMLABS 3DP - Custom synthetized oligomer by BlueCast, not available to market, patent is going to be applied. - Excellent casting of small engravings both positive and negative - Fits all jewelry needs from filigree to medals as well dental one - Excellent for stones presetting - Curing triggering tuned to maximize antialias smoothing - No monomer inside, no smell - No aggression on plastic parts (tested on PS, PMMA) - No postcuring needed for casting - No shrinkage - Easy welding with wax, forget about pattern lost into investment - Can be polished, engraved, drilled (postcure is needed) - Low viscosity, easier to recover uncured resin from models, easy to wash - No preheating required - Very little hygroscopic while liquid, no water absorption while printed - Atoxic, solvent free, very low phospine content, very low skin irritant - Cleaner burnout, 0,00% ash residual - Suitable for fast burnout - Full burnout also at lower temperature (750 C°) - No expansion during burnout, sublimation starts at 130 Celsius - Excellent dimensional stability in time, no need to stock in cold/dark places |