Jabil - TPE SEBS 1300 85A - Natural
Description
TPE-SEBS 1300 85A 3D printing filament is a Shore 85A elastomer that does not require drying to process and has excellent bed adhesion and ease of printing. TPE-SEBS 1300 85A has low moisture absorption and has better elasticity for applications that require high flexibility and durability. It works on all open-platform direct drive 3D printers and can be run on desktop 3D Printers with PTFE Bowden Tubes. TPE-SEBS can stretch over 500% and is much easier to print than TPU filaments.
TTPE-SEBS 85A can be used for parts that need elastomeric properties that can bend, flex and stretch without the need for a heated print bed and has demonstrated a very high success rate in printing complex geometries. TPE-SEBS is similar to rubber and other thermoplastic elastomers in its properties, soft to the touch while still being strong and flexible. It is well suited to printing parts that need to dampen vibrations or products that need to retain flexible properties under weather or heat exposure while still maintaining good elastic properties; such as seals, gaskets, no skid / no mark feet, soft touch grips for power tools, and no slip mats for auto interiors.
Applications
- Products that need to retain flexible properties under weather or heat exposure
- Parts that need to dampen vibrations
- Complex geometries
- Casting patterns
- Seals / Gaskets
- No skid / no mark feet
- No slip mats for auto interiors
- Soft touch grip for power tools
- Industries include
- Automotive
- Aerospace
- General Manufacturing
Advantages
- Easier to print than TPU filament
- Shore 85A elastomer
- High flexibility, bend and stretch (can stretch over 500%)
- Low moisture absorption
- Less visible layer lines
- Does not require drying to process
Specifications
Printing Temperature:
The optimal printing range is 240° – 250°C
Bed Temperature:
A bed temperature of 70°C will provide the best adhesion during printing.
Printing Speed:
Base printing speed of 25 mm/s
Infill speed of 25-30 mm/s
Wall speed of 25-30 mm/s
Initial layer speed of 10 mm/s
Cooling:
For best results, do not use a cooling fan while printing with TPE-SEBS.
Diameter(s):
2.85mm
Color(s):
Bed Adhesion:
Use a brim when printing on clean glass. When using a PEI sheet, use a skirt on a clean plate. There is no need for any additional adhesion methods.
Other Tips:
For best results, print TPE-SEBS 85A on a direct-drive printer. If attempting to print on a Bowden-style printer, using a PTFE or fluoropolymer-lined Bowden tube will increase success.
If the material starts to short feed or bind up in the extruder, turn down the feeder wheel tension. It is recommended to start with as little tension as possible.
Information Sheets
Print Settings
jabil_tpe-sebs-1300-85a_print-settings.pdfTechnical Data Sheets
jabil_tpe-sebs-1300-85a_technical-data-sheets.pdfCompare Materials
Jabil Powders
| View Powders | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| UTS (Mpa) Orientation |
Tensile Modulus (Mpa) Orientation |
EaB (%) Orientation |
Unnotched Impact Energy (J/m) Orientation |
Notched Impact Energy (J/m) Orientation |
Melt Temperature (°C) |
||||
| Material | XY | Z | XY | Z | XY | z | XY | XY | |
| PA 4000 | 46 | 37 | 1790 | 1130 | 34 | 12 | 1010 | 48 | 182 |
| PA 4050 GB | 44 | 46 | 3390 | 3380 | 6 | 5 | 221 | 33 | 181 |
| PK 5000 | 53 | 51 | 1305 | 1349 | 41 | 21 | 1241 | 83 | 197 |
Jabil Filament
| View Filaments | ||||||
|---|---|---|---|---|---|---|
| UTS (MPa) Orientation |
Tensile Modulus (MPa) Orientation |
EaB (%) Orientation |
Unnotched Impact Energy (J/m) Orientation |
Notched Impact Energy (J/m) Orientation |
Melt Temperature (°C) |
|
| Material | XY | XY | XY | XY | XY | XY |
| ABS 1400 LW | 35 | 2730 | 3 | 235 | 39 | N/A |
| PA 0600 | 49 | 2660 | 5 | 822 | 69 | 188 |
| PA 4035 CF | 66 | 6000 | 4 | 557 | 191 | 180 |
| PA 4500 | 56 | 1930 | > 100 | 830 | 62 | 190 |
| PA 4535 CF | 88 | 10600 | 3 | 525 | 125 | 190 |
| PC 1500 FR | 61 | 2210 | 6 | 850 | 51 | N/A |
| PETg | 45 | 1655 | 24 | N/A | N/A | N/A |
| PETg 0800 ESD | 39 | 1895 | 8 | 416 | 49 | N/A |
| PLA 3100 | 47 | 3240 | 6 | 207 | 31 | 155 |
| TPE SEBS 1300 85A | 6 | 19 | 900 | N/A | N/A | 163 |
| TPE SEBS 1300 95A | 11 | 93 | 780 | N/A | N/A | 165 |
| TPU 90A | 19 | 13 | 4540 | N/A | N/A | 220 |