Polymaker PolyLite ABS - White
Durable and Versatile
PolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing.
Printing Settings
Don't waste your time fiddling with settings, and get printing right away. Check out our pre-tested print settings below to get started printing with your brand new filament even faster. Some settings may change slightly depending on your 3D printer.
- Hotend Temperature: 245°C - 265°C
- Bed Temperature: 90°C - 100°C
- Print Speed: 30mm/s - 50mm/s
- Fan: Off
For Direct Drive Extruders
- Retraction Distance: 1mm
- Retraction Speed: 20mm/s
For Bowden Tube Extruders
- Retraction Distance: 3mm
- Retraction Speed: 40mm/s
Drying Settings
(Only if the material has absorbed water)
- 70°C for 6hr
Product Video
Which 3D printer can print PolyLite™ ABS?
Depending on the size of the models you are trying to print, PolyLite™ ABS can required enclosed 3D printer, or even actively heated chamber.
In general a non-enclosed 3D printer with 90˚C bed temperature and 260˚C printing temperature can handle models smaller than fist size. For bigger prints you will required an enclosed 3D printer (~40-50˚C), for models bigger than ~15-20cm in any direction, it will require an actively heated chamber (~70˚C+).
Using proper bed adhesion can also help printing larger parts without deformation/warping issue. We can recommend Magigoo as adhesive and bed surface options.
Can PolyLite™ ABS be post-processed with Acetone?
Yes, PolyLite™ ABS can be smoothed with acetone.
WARNING: Acetone is a dangerous chemical, please handle it with the necessary safety precautions.
We recommend PolySmooth as a safer alternative to create smooth surface models.